CRITICAL REVIEW OF SPUN YARN PRODUCTION TECHNOLOGY

Published: 2021-07-06 06:27:51
essay essay

Category: Business and Finance

Type of paper: Essay

This essay has been submitted by a student. This is not an example of the work written by our professional essay writers.

Hey! We can write a custom essay for you.

All possible types of assignments. Written by academics

GET MY ESSAY
AbstractA large number work has already been done on the development of spun yarn technology. Following article specially evaluates latest inventions in its production like twisting system built on the technology of super conduction in a ring spinning system and the idea of manufacturing cluster spun composite yarn. These mentioned technologies are of very high potential and have not yet been used in the industrial sector.IntroductionProduct qualities and processes in spun yarn have various modifications of existing techniques and have significant latest creations. During the spinning process, twist maneuvers an active role in transmitting strength in tensile during the process of spinning. The resistance between the ring and the traveler is the major flaw in this technology. It generates heat at a very high speed which results in limiting the productivity. This resistance between the traveler and the ring is remarkably reduced through the execution of a system bearing the magnet based on the super conduction technology. It totally exchanges the present ring and traveler system of this machine. Thus this yarn is the new concept of producing composite yarn. In this concept, the slotted roller is utilized by the polyester multifilament which is the mixture of cotton fiber. The slipperiness of staple fibers is reduced by this yarn relatively to the core spun composite yarns’ filaments.TWISTING MECHANISMA. BackgroundThe usage of spinning process is to a high degree in short staple spinning processes. The superiority of this process is still over improper technologies of spinning for example air jet and rotor rotating, etc. The ring and the traveler compound for injecting twist and rambling them on steals. However, the main drawback of the old system is the resistance among the both. An excellent amount of heat is generated at a greater speed which results in decreasing the production. This drawback reduced through a system bearing the magnet based on superconducting technology by replacing the present loop and traveler system. It consists of a superconductor which is circular and a magnet ring which is permanent.B. The functionality of superconducting magnet bearing The superconducting magnet bearing is a joined connection between a mediator system, e.g., an enduring magnet and High-temperature Superconductors (HTSC) components (Mahmud Hossain, 2014).Figure 1 Levitated magnet over superconductor (HTSC)These bearings self-stabilize themselves as in they stay entirely inactive devices without any essential importance for location sensing and regulator. This is the reason for them being wear-free, the repetitiveness of the sensor and control elements, it has very high reliability and has no EMC (electromagnetic compatibility) (Mahmud Hossain, 2014).Below its normal temperature when the super conductor is cooled down, the permanent magnet ring elevates and freely rotates up the superconductor ring following the rules of super conducting phenomenon and spike. Hence, the SMB assures an operation which is free of friction during spinning and ensures a more considerable amount of speed and the rate of production increased drastically. The features of yarn are similar to those of conventional rings after the investigation of the SMB system.C. Conclusion In the year 150, many twisting mechanisms have been developed to achieve a very high rate of production. Spindle development, a subordinate revolving ring breadth, automating etc. were the most indispensable creations of this time. Most importantly, this bearing system has a straightforward construction unlike other systems such as active magnet bearing. Also, this super conducting magnet bearing system which is free of friction has very high latent to replace the present traveler system. However, a little more optimization is required in the size and weight of PM. An establishment of the theoretical method is required for the prediction of tension in yarn, formation of the balloon, PM weight, etc. by keeping in mind the super conductor magnetic bearing system. Because of no friction, there is a possibility that the yarn can spin dual the speed of loop rotating machine. Many researchers have previously established counterfeits of mathematics for spinning process of a ring. Thus, this system, i.e., SMB is the revolution in twisting rule of yarn which eliminates the resistance of the loop and rover system in the present machine of spinning of ring.CLUSTER-SPUN YARN – AN INNOVATION IN COMPOSITE YARN SPINNINGA. BackgroundResearchers have given a complete stress on the improvements of Complex yarn spinning procedures. In this method, a unique structure is formed with the combination of continuous filaments yarn. Various spinning methods produce composite yarns for example ring, air jet, resistance and spinning of rotor among which the most conventional one is the modified ring spinning method. It has of two mechanisms, i.e., fibers that are stapled and the filament. They form the affiliation of center and sheath of the yarn.The major problem with composite yarns is the decline of the staple fibers comparative to the filament. A high level of twist is applied to build consistency between the core component and the sheath. But this will increase the cost of production and reduce the speed of production as well. To decide this issue, a fresh idea of cluster-spun anecdote is born. It consists of multifilament of polyester which is haggard by a scheduled roller and fibers of strand which play as the principal part. Some physical features of cluster-spun and spun-core were calculated through SEM, i.e., scanning electron microscopy as well (Mahmud Hossain, 2014). Image processing and microscopic methods are secondhand to revision the dispensation of threads in the crosswise of model yarns to interrogate the purpose and longest at interruption (Mahmud Hossain, 2014)B. Cluster spun-yarn propertiesCore-spun yarns have a lower purpose and long-ness than that of yarns of cluster-spun which technically means that clustering influences that yarn properties and structure because of the following reasons;1. The mixture of a cotton fiber and polyester filament provides a greater force of friction and cohesion in fiber.2. It decreases the tendency of slippage of the fibers that are stapled which are comparative to the filament resulting in increased migration of fiber in the yarn.3. Cluster-spun yarns are clearer in view than yarns of core-spun as well as the spun yarn of cluster structure packed more tightly than spun of core. C. ConclusionsInnovative ways of manufacturing complex yarn which is named the cluster-spun which is a twisted yarn consisting of threads of cotton and multifilament made of polyester scattered by using a scheduled roller.A positioned roller has good imprints dividing the multi-filaments into two or more sub-strands which produce clustered-spun yarns.The difference in internal structures and cluster yarn’s mechanical structure have more exceptional outcomes in the properties of the yarn. Eventually, this resulted in the up gradation of yarn properties thus reducing the tendency of decline of staple fibers comparative to the filament. Also, more significant increase in the force of friction and connectedness produce an evenly and toughly blended mixture of filaments made of polyester and strands of thread in spun yarn of the cluster. Additionally, the subordinate rotation is compulsory for the production of quality yarn. As a whole, the spun of spun has a high latent to play a vital part in the profitable presentation of complex yarn revolving in the close prospect.Bibliography1. Mahmud Hossain, A. A. C. S. D. B. F. L. S., 2014. Innovative twisting mechanism based. Textile Research Journal, Volume 84(8), p. 10.2. Mustafijur Rahman*, M. G. N., 2014. Recent Innovations in Yarn Technology: A Review. International Journal of Scientific and Research Publications, 4(6), p. 7.3. Sawhney, A.P.S., Kimmel, L.B., Robert, K.Q., and Ruppenicker, G.F., Comparison of Filament-Core Spun Yarns Produced by New and Conventional Methods, Textile Res. J. 62(2) 67–73 (1992).4. Gharahaghaji AA, Zargar EN, Ghane M, et al. (2010) Cluster-Spun Yarn— A New Concept in Composite Yarn Spinning. Textile research journal 80: 19-245. Jou G, East G, Lawrence C, et al. (1996) The physical properties of composite yarns produced by an electrostatic filament-charging method. Journal of the Textile Institute 87: 78-96.6. Abdel-hady F, El Mogahzy Y, AbuElenin S, et al. Innovative approach to high-speed spinning using a magnetically-elevated spinning ring. AUTEX Res J 2006; 6: 113–121.7. Iwama Y. Spinning ring. Patent EP 0730054B1, Europe, 1995.Klein W. The technology of short-staple spinning Shortstaple Spinning Series – volume 1. Manchester, UK: The Textile Institute, 1998, p.478. Stalder H, Heff A, Oberholzer F, et al. Ring spinning machine with a variety of spinning rings and traveller located thereon. Patent DE 196 37 475 A1, Germany, 1998.9. Ghosh TK, Batra SK, Zeidman MI, et al. An integrated approach to dynamic analysis of the ring spinning process, part III: the effect of coefficient of friction and the balloon control rings. Textil Praxis Int 1992; 47: 791–800.10. Haas OD, Schultz L, Berger D, et al. Demonstration fu¨r magnetbahnsystem mit supraleitern im trag-und fu¨hrsystem. Special Edition of eb- Elektrische Bahnen, Band 8–9, 2009.

Warning! This essay is not original. Get 100% unique essay within 45 seconds!

GET UNIQUE ESSAY

We can write your paper just for 11.99$

i want to copy...

This essay has been submitted by a student and contain not unique content

People also read