Executive Summary In the year 2000, a New Zealand’s jet aircraft flying for Apia avoided becoming an incident through the better situational awareness by pilot and crew member. They all demonstrated the high quality of teamwork. We’ll see what the factors that brought aircraft close to an accident and how the pilot and crew responded to the situation. The relationship between EFIS system and ground-based precision approach have been discussed. The different components of EFIS have provided facilities to pilot and crew members. Now pilots have more choices, these choices are displayed through data buses, they can choose from the range of displays. Advances have been made in EFIS system and now it provides more efficiency. We have also reviewed that how a change in color helped pilots. Also, we have discussed how the green needles show the navigation on the ground. Moreover, the safety systems have significantly prevented the CFIT accidents that happened in the past.IntroductionWith the right approach used by pilot and crew members, the New Zealand Jet Aircraft prevented to become an incident. There is a number of contributory factors in this regard. The decision and responses contain the lesson for the other pilots. The ground-based precision approach still exists. One of the most important aspects of the aviation is the relationship between EFIS and ground-based precision approach and how safety systems prevent CFIT accidents. NZ60 Approach In 2000, a New Zealand’s jet aircraft B767 flying for Apia faced a mistaken ILS signal while approaching there. During that time, airfield works were in progress. Also, nine written notifications were issued to pilots about the serviceability of different navaids on the airport.The crew gave a briefing on an ILS viewpoint with the VOR concept as support. The airport staff cleared the flight for the arrival 15-mile trajectory for ILS (Instrument Landing System) 08. In this regard, a low drag concept of 10 knots with the wind blowing in the direction of travel was used. A radio transmitter was intercepted with FLAP 1 at the speed of 220 knots and 14nm. The auto-flight system captured the glideslope after one second of arming of approach mode. The signals indicated the aircraft was at the right flight profile with no warning flags and without the identification of ILS. After capturing glideslope, the pitch motion of aircraft was lower than the routine with high speed and increased descend level (YouTube). The crew came forward to focus on the power and resistance of the aircraft by using speed brake, swing and gear. A flying pilot observed the irregularity of altitude and DME. Also, the monitoring pilot noticed that the visual cues were not in the alignment with their mage in his mind. Therefore, all the pilots called a go around and finished at 6 nm from the threshold of the runway. Moreover, the 2nd approach was utilized as a localizer concept discrediting the signal of glideslope (Youtube).Contributory Factors The authorities that issued the written notices to the pilots termed Glide path as non-monitored. The crew had no idea about the meaning of the term.For the purpose of radiating the signal of Glide path with the selection of unserviceable transmitter, the installation of ILS was allowed.The only Localizer carried the ILS’s ident, not Glide Path that is why there was no integration of Gide path as per the assumption of the crew.The warning flags were not present that give indications to the crew in case of wrong signalsThe lack of awareness concerning erroneous or mistaken transmissions.The clearance of the crew and aircraft for complete ILS system by Air Traffic Control unit.Explanation of the Scenario With the help of Swiss Cheese Model, this is how different barriers were broken.There was a breach of the first defense due to lack of awareness of NOTAM term.A false indication was given to crew which resulted in the breach of the second signal.In the absence of warning signals or flags, there was a breach of third defense in the flight floor for the alertness of crew about the wrong glide path.The fourth defense was also broken at the time when they didn’t complete the height check.As the warning of GPWS system kept silent, the fifth defense was also violated.The sixth defense remained intact- The crew had developed the awareness of the situation as a result of the glideslope capture, excessive workload, approaching island lights and the difference in the DME or Altitude check.Preventive Factors for NZ 60:Following are the factors that prevented NZ 60 to become an incidentAll of the crew members displayed CRM (Customer Relationship Management)A comprehensive and planned approach to the briefing was used. A substitute briefing about the use of VOR approach gave next level of planning. This enabled all of the crew members to share the same model which was present in their mind.There was a constant inquiry concerning the aircraft state that led to the Altitude check/DME differencesFor the purpose of enhancing situational awareness the outer visual aids such as island lights were usedThe right decision of a Go AroundThe deployment of automation to minimize workloadThe demonstration of effective communication and teamworkThe decision of using LocalizerFollowing are the can also serve as preventive measures In case of False / Erroneous ILSAlertness regarding the possibility of false signals including the absence of warning flags.Checking and understanding the terminologies used in the written notices to the pilot i.e. NOTAMS to examine the operational level of ILSCarry out a complete briefing including all the relevant points, for example, MSA, terrain location, objects made by man, expected ground and vertical speeds to grasp overall idea of the approach.Deploy a mature approach to minimize workload, it would help to detect further anomalies through careful analysisAlways maintain situational awareness, it can be achieved through questioning in case of any confusion.Alertness while carrying out different approaches to the uncontrolled situations at airports especially when ATC is not protecting the ILS are of the airport. At such airports, there is every likelihood that ILS signal and erroneous signal combine together to give a false indication.Carry out a cross-check of the altimeter against the crossing altitude of glideslope at the FAF. Also, perform the continuous distance and height check to ensure correct profile is flyingFor the purpose of cross-checking, use the sources of raw data to note that aircraft is on the right course of the localizer.Put a Query to Airport traffic control (ATC) in case there is any doubt in ILS or the clearance of approach. This is the tool of cross-checking for ensuring the correct assignment approach.If the crew is facing any contradictory indications, perform a “Go Around “.The relationship between EFIS (Electronic Flight Instrument System) and Ground-based Precision ApproachThe instrument of large aircraft cockpit system that displays the flight data through electronic means rather than electromechanically is known as Electronic flight instrument system. Generally, EFIS comprises of a primary flight information, various function display and a comprehensive system that indicate engine and alerts crew. The installations of EFIS differ to a great extent. There might be one display in the light aircraft unit that shows the flight and navigation data. However, a big commercial aircraft may have six or more display units. Normally, the controls can be viewed at the website for technical information. Displays, Controls, and Data processors are its three modules (Wiegmann et al.). A primary EFIS may provide all the functions in a single unit.The display units are the most significant parts of the overall system of EFIS and are the characteristics that direct to the glass cockpit. The unit that serves as the replacement of ADI is known as primary flight display (PFD). Also, navigation display replaces the HSI as a separate display. The function of PFD is to display all the information regarding flight which also includes calibrated airspeed, vertical speed, and yaw. The primary purpose of PFD is to enhance the situational awareness of pilot by giving alerts to aircrew about an unexpected or hazardous situation such as low speed of air, high descent. The PFD changes the color or shape of the display to enable the pilot to detect any hazard, it also provides audio alerts. The multifunction displays make separate or disintegrated navigation display insignificant. In this regard, they have another option of a large screen to display navigation and PFD. The navigation display, PFD, and multifunction display have the same physical structure. The system interface determines the information that is displayed.Control PanelsThrough EFIS, pilots have the controls that choose a range of display such as a compass. The data buses display the pilot’s choices where other tools use the inputs from the pilot. The pilot chooses the required altitude on the control panel, The EFIS repeats this on the PFD and then by making a comparison with the real altitude, it then displays an altitude error. The automatic control systems of flight use the same option of altitude for leveling off. Appropriate warnings are given by altitude alerting system.Data ProcessorsThe symbol generator produces the visual displays of EFIs. The pilots provide the inputs of data, signals received from sensors and he also makes a selection of the format of EFIS. The symbol generators can have other names such as display electronics unit. The symbol generators perform functions besides generating symbols. It provides monitoring facilities along with a display driver. The controls and sensors give inputs through data buses and then their validity are examined. The relevant calculations are then performed and then display drivers and graphics generators generate input to display units.Human elementsThe pilot requires a different combination of data at different phases of the flight. For this purpose, the pilot must view the electromechanical instrument. Normally, some of the indications may not be displayed by EFIS such as vibration of the engine. However, the system shows the reading in case some parameter goes beyond its limits. In the same way, EFIS displays the scale of glideslope in ILS approach. If there is a case of input failure, an additional indicator is added by an electromechanical instrument. Also, an invalid information is removed by EFIS from the display and replaces a proper warning.ColorsThe conventional systems have used color in the past but they didn’t have the capacity to change color to signal some conditional change. The EFIS has the electronic display technology and it doesn’t have any such limitation that is why it uses colors at wide scale such as plane comes near to glide slope, it displays an indication through blue caption that glideslope is equipped. To show the type of navigation, the navigation needles are coded by typical EFIS system. The Green needles show the navigation on the ground such as ILS systems and Localizers. GPS navigation is demonstrated by Magenta.Advantages of EFISEFIS doesn’t have physical constraints of conventional equipment. The pilot has different options, he can choose the display that indicates a planned track given by the system of flight management. The pilots can select to overlay the picture of weather on the route that is displayed.Prevention of CFIT accidents through EFISGround-based approaches still exist, therefore, for effective flight operation EFIS integrates with the ground-based precision approach and give pilot many options and clarity. Through effective systems of EFIS, multifunction displays and navigation needles CFIT and also the situational awareness by pilot and crew avoid CFIT accidents that happened in the past. The go-around option is also a significant approach by the pilot to avoid CFIT accidents.Conclusion The factors that prevented NZ60 from becoming an incident was the wise approach from the pilot, he used a “go around” tactic. Also, the crew members displayed customer relationship management (CRM). The comprehensive approach of the briefing was effectively used, an alternate briefing gave next level of planning. The effective communication and teamwork also proved to be useful. The decision of using Localizer also played a role in an important preventive measure. Further, the relationship between EFIS and ground-based precision approach enhance the situational awareness in the pilot and other members of the crew. There are a lot of advantages of EFIS system as it doesn’t have the physical limitations that traditional equipment had. Also, he can select the display he wants, he can also over impose the weather picture on radar route. Also, through control panels of EFIS, pilots have the choice to choose the range such as compass etc. over the years many advances have been made in EFIS system.Recommendations The pilot and the crew members should rely on the EFIS system for precision. The relationship between modern EFIS system and ground-based approach provide a lot of facilities for pilot and crew members. The pilot choices are displayed through data buses. It also provides an enhanced level of monitoring level. Finally, the relationship between EFIS and ground-based precision approach prevent CFIT accidents that happened in the past.ReferencesYouTube. (2018). NZ60 Erroneous ILS Incident, Apia. [online] Available at: https://www.youtube.com/watch?v=GelRBhJ4gmI [Accessed 18 Apr. 2018].Wiegmann, D.A. and Shappell, S.A., 2017. A human error approach to aviation accident analysis: The human factors analysis and classification system. Routledge.